In the industrial lifting and material handling sectors, safety is paramount. When cranes are used to move materials, the components that connect the load to the hook—the "non-fixed load lifting attachments"—are critical points of failure. The standard is the essential European norm ensuring these attachments are designed, manufactured, and tested to the highest safety levels.
Components subjected to high-cycle operations must be designed to withstand repetitive stress cycles without structural failure. 2. Loss of Load Prevention din en 13155 pdf
The lift was delayed for 48 hours while the subcontractor rushed a compliant set of lifting beams and magnets that met the 2 x WLL elastic condition SIST EN 13155:2021/oprA1:2023 | iTeh Standards 1 Mar 2023 — In the industrial lifting and material handling sectors,
Disclaimer: This article is for informational purposes only. Always refer to the official, up-to-date standard document for legal and technical compliance. Always refer to the official, up-to-date standard document
For equipment intended for more than 16,000 duty cycles, the design must account for fatigue, similar to the requirements for full cranes.
Depending on the attachment type, you need:
The secondary safety system, a requirement Elias had just verified in the standard, was dead. Without that PDF, he might have overlooked the lack of a "two-action control" for releasing the load, a critical safety feature for non-self-closing clamps. 3. The Stand-Off