Verify that water valves are fully open. Clean the water strainers. Check if the cooling water chiller is functioning correctly. Problem 3: Oil Contamination in Helium Lines
Proper installation prevents premature component failure and ensures optimal cryogenic performance. Environmental Conditions Install in a clean, dust-free indoor environment. Maintain ambient temperatures between 5°C and 35°C. sumitomo f50 compressor manual free
The F-50 is a water-cooled, three-phase helium compressor designed for high efficiency and long-term continuous operation. Understanding its fundamental parameters ensures safe operation and integration. Specification Marathon CP-8, CP-8LP, CH-204, SICERA series Helium Gas Purity 99.999% (5.0 Grade) minimum Static Charging Pressure 1.60 to 1.65 MPa (at 20°C / 68°F) Operating Pressure (High Side) 2.1 to 2.3 MPa typical Operating Pressure (Low Side) 0.5 to 0.7 MPa typical Cooling Water Flow Rate 6.0 to 9.0 Liters per minute (L/min) Maximum Water Inlet Temp 32°C (90°F) Power Supply Requirements 200V AC (3-phase, 50Hz) or 200–220V AC (3-phase, 60Hz) Weight Approx. 115 kg (254 lbs) 2. Installation and Initial Setup Verify that water valves are fully open