17c61 Ecu Pinout //free\\ →

To wake up the 17C61 ECU on a bench, you must connect the following to your programming tool (e.g., KTAG, Flex, Autotuner):

The specific you are using (e.g., KTAG, Foxflash, PCMtuner)? 17c61 ecu pinout

Power & ground

The EDC17C61 typically has two main connectors. Ensure you are looking at the pin side of the ECU (the male pins) with the locking tab facing upward. To wake up the 17C61 ECU on a

Ignition / crank/cam