Therefore, the device with the hardware ID USB\VID_0FE6&PID_9900 is a , commonly known as a USB network card, that uses the Corechip SR9900 chipset.
A common use case for this adapter, especially on devices like the Raspberry Pi, is to assign it a persistent name. By default, Linux might name interfaces eth0 , eth1 , etc., which can change if you plug in multiple adapters or reboot. usb vid-0fe6 amp-pid-9900
: This is often caused by a corrupt driver stack or inadequate power from the USB port. Try plugging the adapter directly into a motherboard port (on the back of a desktop PC) rather than a front panel port or an unpowered USB hub. If the issue persists, completely uninstall the driver from Device Manager, restart the machine, and clean-install an alternate driver version. 3. Limited Speed Capped at 10 Mbps : This is often caused by a corrupt