Gt9xx-1024x600 Better 🚀 👑

| Test | Result | |-------|--------| | Linearity error | < 1.5% | | Response time | < 15 ms | | Water rejection | Pass (with FW v2.3) | | ESD (air) | ±8 kV |

: This signifies the Goodix GT9-series capacitive touch screen controller driver used by the device's kernel. gt9xx-1024x600

| Specification | Value | Notes | | :--- | :--- | :--- | | | Projected Capacitive (PCAP) | | | I2C Interface Address | 0x14 or 0x5d | Consult the datasheet for your specific module. | | Communication Protocol | I2C (Standard Mode/Fast Mode) | | | Operating Voltage (VDD) | 2.8V - 3.6V | Typically 3.3V | | I/O Voltage (VDDIO) | 1.8V - 3.3V | Often derived from VDD. | | Resolution Support | 1024 x 600 (WXGA) | Set via max-x and max-y in DTS. | | Touch Points | Up to 5 (GT911) or 10 (GT9157) | Configurable in driver. | | Power Consumption | ~3mA (Active), ~50µA (Sleep) | Spec for capacitive controllers. | | Test | Result | |-------|--------| | Linearity

A typical 6-pin interface is required for connection to the host processor: Description Power Supply Typically 2.8V to 3.3V. Reference ground. Serial clock line for communication. Serial data line for communication. High/Low pulse to notify the host of a touch event. Used by the host to reset the controller. 4. Implementation Resources Download the GOODIX GT911 LCD Controller Datasheet | | Resolution Support | 1024 x 600

The drivers allow for fine-tuned calibration, allowing the screen to work even through thick protective glass, which is vital in industrial settings. 3. Integrating the Go to product viewer dialog for this item. with 1024x600 Displays