Kt 70 Installation Manual Here
Use a high-quality 50-ohm coaxial cable (RG-58/U or equivalent) to connect the antenna to the rear connector.
Disclaimer: This write-up refers to the Polycase KT-70 plastic electronics enclosure . If you are looking for the Bendix/King KT-70 Mode S Transponder, the installation manual is a separate, specialized aviation document (often referenced as 006-00673-0002). Kt 70 Installation Manual
The KT 70 must be connected to a gray code encoder for altitude reporting. Use a high-quality 50-ohm coaxial cable (RG-58/U or
Consult the manual's programming matrix to ground the exact pins corresponding to your aircraft's hexadecimal or octal code. Required Testing (FAA CFR 91.413) the installation manual is a separate

Recent Comments