Dell D220p 01 Power Supply Pinout 2 |verified| -

The D220P-01 is a popular platform for modifications, primarily to convert it into a variable voltage power supply or to adjust its built-in protection limits.

Note: Some sources indicate an alternative pinout where pins 1-4 are Ground, 5 is Signal, and 6-8 are 12V. Always verify with a multimeter, as D220P-01, ADP-220AB, and F220P-00 may have slight variations.

If you meant a different D220p‑01 part (e.g., an internal PSU board or multi‑pin connector), tell me which connector (photo or part label) and I’ll give the detailed pinout. Dell D220p 01 Power Supply Pinout 2

+-------------------------+ | (1) +12V (2) +12V | | (3) +12V (4) Rsvd | |-------------------------| | (5) GND (6) GND | | (7) GND (8) Remote | +-------------------------+ (Clip or Keyway at bottom)

For more in-depth visual guides on modifying this power supply, you can search for "Dell D220P 01 Power Supply Wiring" on YouTube. The D220P-01 is a popular platform for modifications,

| Pin | Wire Color | Signal | ATX Equivalent? | |-----|------------|--------|------------------| | 1 | Grey | +5V SB | Yes (same) | | 2 | Black | GND | Yes | | 3 | Black | GND | Yes | | 4 | Orange | +3.3V | Yes | | 5 | Red | +5V | Yes | | 6 | Red | +5V | Yes | | 7 | Blue | -12V | Yes | | 8 | Yellow | +12V1 | Yes | | 9 | Yellow | +12V1 | Yes | | 10 | Brown | +12V2 | – Secondary 12V | | 11 | Black | GND | Yes | | 12 | Orange | +3.3V | Yes | | 13 | Orange | +3.3V | Yes | | 14 | White | -5V | Obsolete – rarely used now | | 15 | Black | GND | Yes | | 16 | Green | PS_ON | Yes (active low) | | 17 | Black | GND | Yes | | 18 | Grey | PWR_OK | Yes | | 19 | Red | +5V | Yes | | 20 | Purple | +5V SB | Yes |

The Dell D220P-01 remains a useful, repurposable PSU if you understand its . The key takeaway for anyone searching "Dell D220p 01 power supply pinout 2" is this: If you meant a different D220p‑01 part (e

Note: The pin numbering can vary in some pinout guides. The following represents the most commonly accepted wiring spec Scribd. Pin Assignment Table Remote +5Vpositive 5 cap V 12V12 cap V (Trigger/Signal) Pin 2: Ground ( −negative Pin 3: Ground ( −negative Pin 4: Ground ( −negative Pin 5: Remote Ground/Signal Ground ( −negative Pin 6: +12Vpositive 12 cap V Pin 7: +12Vpositive 12 cap V Pin 8: +12Vpositive 12 cap V Understanding the 8-Pin Signal Mechanics