Bcl 4562 Manual Full ((hot)) Jun 2026

| Pin | Signal Name (for X/Y1/Y2) | Signal Name (for Z-Axis) | | :--- | :--- | :--- | | 1 | PUL+ (Positive Pulse) | PUL+ (Positive Pulse) | | 2 | DIR+ (Positive Direction) | DIR+ (Positive Direction) | | 3 | A+ (Encoder A Phase Positive) | A+ (Encoder A Phase Positive) | | 4 | B+ (Encoder B Phase Positive) | B+ (Encoder B Phase Positive) | | 5 | Z+ (Encoder Z Phase Positive) | Z+ (Encoder Z Phase Positive) | | 6 | SON (Servo Enable) | /A+ (Encoder A Phase Negative) | | 7 | N/C (Not Connected) | SON (Servo Enable) | | 8 | PUL- (Negative Pulse) | PUL- (Negative Pulse) | | 9 | DIR- (Negative Direction) | DIR- (Negative Direction) | | 10 | A- (Encoder A Phase Negative) | A- (Encoder A Phase Negative) | | 11 | B- (Encoder B Phase Negative) | B- (Encoder B Phase Negative) | | 12 | Z- (Encoder Z Phase Negative) | Z- (Encoder Z Phase Negative) | | 13 | ALM (Alarm Signal) | ALM (Alarm Signal) | | 14 | N/C (Not Connected) | N/C (Not Connected) | | 15 | GND (Ground) | GND (Ground) |

I can provide the exact wiring pinouts or software configurations for your components. FSCUT1000S Laser Cutting Control System User Manual bcl 4562 manual full

Page 18 typically lists: Internal fuse (F1: 50A/32V), fan (12V DC, 80mm), and output cables. | Pin | Signal Name (for X/Y1/Y2) |

In practice, the BMC1603 card is installed inside a computer, while the BCL4562 board is mounted in the machine's electrical cabinet. They communicate through a dedicated 62-pin cable, allowing the computer to control the laser cutter's movements and functions. They communicate through a dedicated 62-pin cable, allowing

Temperature: 0–55°C | Humidity: 5%–95% (non-condensing) Interface Layout and Pin Configurations 1. Power Supply and Grounding