Because these devices are often custom-built or sold by boutique manufacturers, instructions can vary significantly. However, they generally follow a standard operational framework for assembly and safety.
| Problem | Likely Cause | Fix per Instructions | |--------|--------------|----------------------| | Box wobbles on flat floor | One rubber foot missing or worn | Replace foot. If floor is uneven, use a .5mm shim. | | Top surface feels slippery | Sweat buildup or worn texture | Clean thoroughly. Apply provided grip tape in an “X” pattern. | | Creaking sound during jumps | Dry joints | Do NOT use WD-40. Remove pins, apply beeswax to the joint faces, reassemble. | | Cracks around bolt holes | Over-tightening | Stop use immediately. Contact manufacturer for a replacement panel. | fukbox instructions
If your Fukbox arrives in separate halves (a “build-it” model), do not attempt to use it before full assembly. A loose Fukbox can collapse under dynamic load. Because these devices are often custom-built or sold
If you bought a "Fukbox" from a non-official source labeled "Unlicensed," the pinout for the charge pump may be different. In that case, ignore this guide and demand the original build documents from the seller. If floor is uneven, use a
To begin using Fukbox, follow these simple steps: