--- Firstchip Fc1178 Fc1179 Mptools V1.0.5.2 - ((exclusive)) Link

Switch from "Speed Priority" to "Normal Mode" and verify you are not using a restricted B27 chip.

MPTools (Mass Production Tools) are utilized to fix faulty USB drives. The release is crucial for newer batches of flash memory components paired with Firstchip controllers.

: The tool features a merged capacity and speed priority utility for Toshiba/SanDisk 3D Flash, aimed at maximizing open card capacity and addressing slow read/write speed issues. --- Firstchip Fc1178 Fc1179 Mptools V1.0.5.2 -

The Mass Production Tool is a specialized firmware flashing utility used to revive corrupted, unreadable, or fake USB flash drives built on FirstChip controllers. This service utility works at a low level to overwrite damaged controller microcode, map bad memory blocks, and restore USB storage devices to full working condition. Key Capabilities of MpTools V1.0.5.2

When a flash drive’s firmware loses synchronization with its underlying NAND flash blocks, Windows marks the device as (0 Bytes available) or "Write Protected" . The V1.0.5.2 software clears out the corrupt firmware stack, maps out malfunctioning hardware blocks, and flashes fresh firmware onto the drive. 2. Restoring Fake Capacity Storage Drives Switch from "Speed Priority" to "Normal Mode" and

For basic structural recovery, keep the default scanning configuration. If creating custom partitioned spaces or security locks, adjust the Mode settings. Press on the main dashboard.

: A green PASS status indicates the controller is re-initialized and capacity is restored. Important Constraints : The tool features a merged capacity and

Once completed, the indicator should turn (Pass) and display the correct capacity. Close the tool and safely remove the drive. Troubleshooting & Tips